Category Archives: wine cellar refrigeration

Repair of a Leaking Wine Cellar Cooling Unit in Orange County

To make sure that your prized collection of wines is kept safe and maturing tastefully, your wine cellar cooling unit must always be functioning optimally. Regular unit maintenance is a must so that you can always check for problems and have them fixed promptly. A recent repair completed by M&M Cellar Systems in Irvine, Orange County, California is an excellent example of why a regular maintenance plan for your refrigeration system is important.

Service Call from Irvine, Orange County to Repair an HS 4600 Cooling Unit

Cooling Unit with Leak in Orange County, California. Repair and Maintenance by M&M Cellar Systems

A client in Orange County, California recently called M&M Cellar Systems to report a leaking wine cellar cooling unit. The unit was an HS 4600 System manufactured by one of the company’s dealers, US Cellar Systems. The HS Series of refrigeration units are robust and reliable pieces of equipment. The HS 4600 unit is specifically designed to efficiently cool small wine storage spaces.

A team of HVAC professionals went to investigate the problem and found a leak in the unit’s refrigerant. Amidst the leak, the unit was aptly cooling the wine cellar but it would not continue doing so if the damage was not promptly repaired. The client was fortunate that the leak was discovered early and fixed immediately.

This case is one of the best examples of why it is important to have a regular maintenance plan for your wine cellar cooling system.

An Efficiently Functioning Cooling Unit is an Indispensable Part of an Effective Wine Storage System

Those who have been collecting wine for a long time know that wines should strictly be stored in ideal conditions. Without the necessary storage conditions, wine cannot age tastefully and can go bad easily.

What are the Ideal Wine Storage Conditions?

Wines require a cool environment in order to preserve their quality. An ideal wine storage space should be cooled around a temperature of 55 degrees Fahrenheit. There should also be minimal to no fluctuations in the temperature. Gradual fluctuations, like those caused by the change in seasons, are not a big concern. The problem comes with rapid fluctuations, and if these happen daily or weekly, wines will age prematurely.

Humidity is also an important factor in wine storage. The ideal wine cellar is not too dry nor too damp. The humidity level inside your wine room should be around 70%. If the humidity is too low, corks can dry out and shrink. This will cause air to enter the bottle and ruin the wine. On the other hand, if the cellar is too humid, mold and mildew might form. These can contaminate your wines and alter their flavor.

Invest in an Ideal Residential Wine Cellar

A prudent wine collector invests in the construction of an effective home wine cellar to protect his or her wines. The essentials of a functional wine storage room should be complete. A durable wine cellar door should be built, reliable insulation and vapor barriers should be fittingly placed, lighting that produces minimal heat should be mounted, flooring should be correctly fixed, and of course, quality wine cooling system should be installed.

A residential custom wine cellar without a refrigeration unit is useless. No matter how the cellar is constructed, if no cooling unit is installed, it can never provide the ideal temperature and humidity that wines need.

HVAC Experts from M&M Cellar Systems Repair this Leaking Wine Cellar Refrigeration Unit in Orange County, California

Subscribe for a Regular Wine Cellar Cooling Unit Maintenance Plan

Constant fluctuations in the temperature and humidity inside your custom wine cellar must be avoided to keep your wine collection safe. This means that you need to make sure that your refrigeration system is consistently functioning properly.

There are many situations where homeowners won’t notice any overt damage in their wine cellar cooling system. Most of the time, concealed problems, like refrigerant leaks, won’t get noticed until the unit has started to function irregularly. By then, the damage can be too costly to repair.

Having a regular maintenance plan keeps you updated on the condition of your wine cellar refrigeration unit. Regular servicing provides the opportunity for early detection of any damage or leaks, and subsequently, prompt repair can be implemented. To protect your wine collection, you should avoid problems with your cooling system. It is highly recommended that you seek the help of a wine storage expert and subscribe to a regular maintenance plan for your cooling unit.

Contact M&M Cellar Systems for Regular Maintenance of Wine Cellar Refrigeration Units in Irvine, Orange County

M&M Cellar Systems is one of the leading wine cellar cooling systems construction companies in Irvine, Orange County, California. With years of experience in HVAC refrigeration, heating installation, and servicing, M&M Cellar Systems takes pride in consistent customer satisfaction.

They specialize in the design and installation of climate control systems for wine storage rooms. They manufacture refrigeration units for individual homeowners, commercial developers, and wine cellar builders.

M&M Cellar Systems also teams up with various wine cellar dealers to help them provide a complete wine storage solution to their clients. For more information about their products and services, call them today at (323)578-3330!

Wine Cellar Cooling Systems Technical Update – LPQ Coil Changes

US Cellar Systems recently did some technical updates on the LPQ coil. This post is a brief explanation by Dan Phillips, the owner of US Cellar Systems, about the changes made on the LPQ coil.

Wine Cellar Cooling Systems Technical Update – LPQ Coil Changes

LPQ Coil Changes: The Aluminum Stub Tube

Hello, today we’re going to be talking about the LPQ coil. There’s been a few changes on it and we thought we should go over it because there’s been quite a few questions on it.

Aluminum Stub Tube – 1/2 inch Male Pipe Thread Coupling

One of the first changes you’ll notice is now instead of the aluminum stub tube coming at a 45 degree angle on the back, it now has half inch male pipe thread coupling coming straight down, so you can connect your PVC copper directly to the coil.

LPQ Coil Changes – The Wiring of the Fan Motors

The next thing we’re going to go over is on the inside – the wiring of the fan motors that are now being used. The fan motor is a multi-speed motor but we only use it on the medium speed, which is 900 RPM.

Fan Motor Wiring Changes

When you’re doing the wiring, you’ll note that there are 3 wires for the fan motor – a red, a black, and a white. And you have 2 wires for the Solenoid Valve, which are both blue. When you connect the wiring, ignore the red wire. You want to connect one blue to the black wire, which if you’re using our wire harness, will then connect to the red wire coming from the controller to the black and blue. The other blue wire will go with your white wire, and that will be connected to your neutrals. And that finishes the wiring for the fan motor. As I’ve said before, just ignore the red wire. It’s not used.

Wine Cellar Temperature – An Essential Factor to Wine Storage

A lot of people in Orange County, California are getting into the hobby of collecting wine.Wine needs to be stored in a custom wine cellar in Orange County, California, that can provide the ideal temperature for it to mature tastefully. Learn about how the temperature inside a residential custom wine cellar affects wine.

The Relationship Between Wine and Wine Cellar Temperature

Ideal wine storage solution – Wine Cellar

When people talk about wine storage, the first thing that comes into their mind is temperature. It’s safe to assume that everyone knows that wines need to be cold to be properly enjoyed. Aside from a cool serving temperature, wines also need to be kept in a cool storage temperature. In fact, temperature is the most important factor in the storage and aging of wine. This is why your wine collection should be kept in a residential custom wine cellar in Orange County, California.

Heat is the worst enemy of wine. In fact, this is the reason wine bottles are generally dark tinted: to protect wine from exposure to UV light, which is a source of heat. UV light damages wine by causing the degradation of its stable organic compounds. These organic compounds are responsible for the aroma, flavor, and structure of wine. It is imperative that wines be kept in a wine storage room that has a cool temperature (of 55 to 60 degrees Fahrenheit) with minimal to no fluctuations. To make sure that your wine cellar is able to meet your wine collection’s needs, you need to have an efficient wine cellar cooling unit installed.

Although 55 to 60 degrees Fahrenheit is the ideal range widely accepted for wine storage, many wine experts still disagree on what the ideal range really is. 55 degrees Celsius the widely acceptable temperature level, because it makes historical sense to most people. In the past, wine storage in Europe was practiced in caves, where the natural underground temperature was around 55 degrees Fahrenheit. Therefore, the “ideal” level is actually there due to regional custom and not necessarily scientific study.

What Happens When Wine is Stored in a Temperature Outside the Ideal Range

Wines in a Wine Cellar in Orange County, California

If your wine cellar is not capable of keeping your wine collection in a stable temperature suitable for aging wines, your wines are in danger. The following are the things that happen when your wines are stored outside the ideal temperature range:

Wine Ages Prematurely as Temperature Increases

If you store wine in a temperature higher than the ideal range, it will age faster than it should. Wine aging is a process that should happen gradually, because speeding it up will cause the wine to taste like vinegar. If your wines are stored at 91 degrees Fahrenheit, for example, they will age 50 times faster than if they were stored at 55 degrees Fahrenheit.

Undesirable Chemical Reactions will Take Place

Wine that ages prematurely is bad as it is, but the problem does not end there. Another concern is that higher temperatures will result in undesirable chemical reactions taking place. Speeding up the maturation of wines will cause a bad effect on the bouquet of a wine as it ages. Keeping wines in very high temperatures for even relatively short periods of time can lead to nasty chemical reactions that produce foul odors and tastes.

What are the Indicators of a Heat Damaged Wine?

How can you tell if the wine in your residential custom wine cellar is damaged by heat? Here are two of the things that you should look for:

Check the Color of the Wine

You will know heat damaged wine from regular wine because of the color. In fact, color is the most important indicator of a heat damaged wine. Even without tasting the wine, you will know if it has gone bad. Premature browning of wine can be an indicator of oxidation due to heating. A brick edge in a young red wine is a telltale sign that oxidation has occurred due to excessive heat.

Taste the Wine

An altered flavor is an obvious indication of a heat damaged wine. Since Sherry is an oxidized wine, you can tell that your wine is heat damaged if it has a sherry-like taste.

The Ideal Storage Solution in Orange County, California – Residential Custom Wine Cellar

Construction of a Wine Cellar in California

A genuine wine enthusiast knows how important it is to invest in an effective wine storage solution in Orange County, California. If you truly love your wine collection, you want to make sure that you keep it in a place where it is provided with the ideal wine storage temperature, as well as other wine storage requirements. Among the various kinds of wine storage solutions in Orange County, CA, a wine cellar is the most ideal.

It is always better to have your wine cellar constructed in your own house. A residential wine cellar provides the convenience of accessing your favorite wine any time you want.

Having a custom designed wine cellar is also recommended. Your wine cellar is the place where you will store your beloved wine collection. Therefore, if you want to show off your wine collection to your guests and friends, you will have to show them your wine storage room, too. You’ll want to make sure that your wine cellar is designed to represent your style. Custom wine cellars are designed according to how your want them to look. Moreover, with custom wine cellars, you can make sure that the design of your wine storage room compliments the existing décor in your home.

Coastal Custom Wine Cellars – Trusted Wine Cellar Designer in Orange County, California

Coastal Custom Wine Cellars is a well known wine cellar design and construction company in California. They are reputable for creating beautiful wine cellar designs, that range from simple to extravagant. Moreover, all of their wine storage solutions are effective in providing wines with the ideal storage conditions. Coastal is known for consistently meeting their client’s satisfaction.

Have your dream residential custom wine cellar designed by Coastal Custom Wine Cellars today! For more information about Coastal and their products and services, contact them today at +1 (888) 735-8889!

Beverly Hills Wine Cellar Installations Los Angeles Designs

Beverly Hills Wine Cellar Installations Los Angeles Designs – A Processed Video Transcription

Beverly Hills Wine Cellar Installations Los Angeles Designs .

Hi!

Thank you for visiting Coastal Custom Wine Cellars.

We’ll take you on a short video tour on a project that we recently completed in Beverly Hills.

Now, you might be wondering how in the world we created a wine cellar from this very, very broad canvas, and unfinished area of the home.

This is a photograph that I took the very first day I visited with Catherine Lampson.

Catherine is the interior designer who I worked with and partnered with to complete this project for the home wine cellar design Los Angeles.

We discussed many things such as bottle capacity, some wine cellar design features, some colors, glass walls versus fixed walls.

We had come up with a good plan and eventually get to these 3D visuals; but I want to take you through some of the photographs.

So, once we decided on a few of these key features, we got to working. We completed the walls so that indeed we had a little bit more of a framework to work within and to install in.

As you can see the back walls are now completed. It’s been sealed, insulated, and a moisture-proof drywall has been applied and as you can see the line set and electrical has been installed.

The line set is the wine cellar refrigeration lines and condensate drain lines that are needed for the split refrigeration system.

In this case, we used a dual air wine cellar refrigeration product by Arctic Metalworks of Los Angeles.

There’s also an opening for electrical so we dedicated 20m circuit to run through your compressors and your condensers and such.

We made quite a bit of progress over the weeks and as you can see, the finished product is quite a beautiful work.

Catherine and her team took care of the flooring, Coastal Wine Cellars provide the wine rack design for the custom wine racks, the refrigeration by Arctic Metalworks and we have a seamless glass wall and entry, which was provided by our friends at Glass and Door Design of Los Angeles.

We’re really happy with the result of this wine cellar design Los Angeles project and here’s a little bit more completed or finished room appearance with some furniture in it.

We created a complimentary three-dimensional design package for Catherine and her home owners to take a look at. This gives you a great visual of how the completed project is going to appear.

The total bottle capacities of the wine rack design are posted on the top right of this page which is referred to as the plan view because it’s an overhead view of the wine room.

The entries there at the bottom of the page just below the letter A. The letter A indicates elevation A, and of course, dimensions are posted around the perimeter as well.

So, let’s take a look at some of these wine cellar design features that were included in it that you saw in the photographs.

We’ll start from the bottom.

Here on the far left and at the far right you will see some icons that represent wood cases.

Those were the openings that we took a look at earlier for bulk storage.

But indeed you can put wood cases in there or simply just about anything you like actually.

All these custom wine racks by the way rest on a 4-inch toe kick.

You can see that from that side elevation on the right. It’s referred to as “rack left elevation” and you can see that’s toe kick’s four inches.

All the custom wine racks in between the wood cases are 750-milliliter opening, single-bottle storage openings measuring approximately three and three quarter by three and three quarter that translates to “you’ll be enabled to store standard champagne bottles, Oregon pinots, Ross, California Bluechips.”

Very few bottles will not fit into these openings.

Above the wood cases on the very far left and very far right, you’ll notice those little openings are a bit larger.

These are to accommodate 1.5-liter or magnum bottles above the tabletop area in the center, which is an open area with the solid side panels; above that is the louvered grill cover.

This is on a hinge and indeed conceals the mechanical appearance of the fan coil and the evaporator.

The thermostat is located on the left side of the room as you enter.

The label-forward horizontal displays add a nice touch, I think, and it got a lot of character.

These bottles are labeled forward for horizontal displays and enable you to store one bottle and, although, not visible, up to two bottles behind the visible bottle.

So, we were very happy with this wine cellar design project; the clients were thrilled.

We hope you visit us if you have a wine cellar design Los Angeles project at www.winecellarsbycoastal.com.

Cheers!

Residential Wine Cellar Refrigeration Installation Project in Aliso Viejo California

Choosing the right type of wine cellar refrigeration system spells the difference between enhancing the quality of wines and hindering their aging process.

Wine Cellar Refrigeration and Proper Wine Storage

Wine Cellar Refrigeration & Proper Wine Storage

The proper wine cellar cooling systems will help maintain the ideal temperature level and provide the right amount of humidity in a custom wine room for wines to reach their aging potential.

To help determine the type of wine cellar cooling systems that is most compatible with a particular wine cellar space, there are several factors that need to be considered. These key factors are: location of the wine room, room size, ambient conditions, the size of the wine collection, and the client’s budget.

Addressing these elements, along with other constraints, will determine the proper wine cellar refrigeration that will help create an efficient and consistent wine storage environment.

Arctic Metalworks specializes in wine cellar construction and wine cellar refrigeration equipment. Their products and services utilize the latest technological advances in the industry, which are proven to be effective and of high quality.

Arctic Metalworks Wine Cellar Cooling Systems Provider

The company was established in 1962 and has a group of well-trained designers, technicians and craftsmen who deliver quality and trusted services. They have already completed several wine cellar construction and wine cellar refrigeration installation projects for clients in Southern California.

Bode Project – The Original Set-Up of the Client’s Wine Cellar in Aliso Viejo California

Let’s take a look at a recently completed completed residential wine cellar refrigeration project of Arctic Metalworks in Aliso Viejo California.

Inefficient Wine Cellar Refrigeration is Harmful to Wines

This project involves the replacement of an existing wine cellar cooling system.

The wine cellar cooling equipment and the modular racking systems were originally installed by another team of wine cellar builders.

The wine racks turned out okay for what the client paid, but the residential wine cellar refrigeration unit created problems and entailed additional costs for the client.

The client was not at all happy with the outcome.

Getting Rid of Breezeaire Cooling Unit

The original wine cellar refrigeration specialist installed a Breezaire cooling system that was not effective and efficient in maintaining the ideal climate conditions for proper wine storage.

The diagnosis of the Arctic team was that the residential wine cellar refrigeration equipment did not have enough power to reach the temperature of 55°F, which eventually led to the equipment icing up and leaking water.

This posed significant risks to the condition of the client’s wine collection, especially with regards to the wine aging process.

What Arctic Metalworks Did to Revive the Wine Cellar and Preserve the Client’s Wines

Arctic Metalworks tore out the brand new Breezaire wine cellar cooling systems and replaced it with an Arctic 0025 split refrigeration system.

A split wine cellar refrigeration system divides the evaporator and condenser into two separate units. This set up allows the noisiest part of the refrigeration equipment, the condensing unit, to be remotely located.

In this particular wine cellar cooling systems project, the condenser was placed outdoors. This not only keeps the unit perpetually cool, but also eliminates noise and heat in the wine storage area.

Residential Wine Cellar Refrigeration Unit with the Evaporator and Condenser

Arctic Metalworks always emphasizes that noise is a factor that must be avoided inside the wine cellar, as it can cause significant disturbance in the natural aging process of wine.

Since the Arctic 0025 is a ductless split wine cellar cooling system, it does not require an adjacent room to exhaust heat. It is also not necessary to install a ducting system to supply cool air into and exhaust warm air away from the wine cellar.

The evaporator unit of this residential wine cellar refrigeration equipment was installed inside the wine room and is connected to the condenser by a line set. This line set is composed of a copper tubing and electrical wiring.

Products and Services of Arctic Metalworks

Arctic Metalworks Products and Services

The Arctic team provides warranty on parts and labor. In addition, they have a full team of qualified technicians that will conduct on-site repair and maintenance service when needed.

Arctic Metalworks has a 1% call back rate on all of their refrigeration equipment, thus making their products the most dependable on the market.

Arctic Metalworks is a family owned and operated business that specializes in wine cellar cooling systems and maintenance services in both commercial and residential applications.

As a wine cellar refrigeration expert in Southern California, Arctic Metalworks provides wine cellar cooling systems, commercial refrigeration equipment, custom wine racks, heating and cooling air conditioning units, and wine cellar construction and renovation services.

Check out Arctic Metalworks on Google Maps to find their location, or connect with them through Yelp. Click here: Arctic Metalworks Wine Cellar Refrigeration Installation Expert.

Residential Wine Cellars in California: Essentials When Building One

There are lots of people who want to start their wine collection. If you want to start your own wine collection, you need to understand that you cannot begin without first making sure that you have a place to store them. Wines can’t just be stored anywhere because they need specific storage conditions for them age properly. The best place to store wines is in a residential custom wine cellar in Orange County, California.

A custom wine cellar in California can adequately provide the ideal conditions for your wines to mature tastefully. Learn about the basic elements to proper wine storage by reading through this article.

1. Lighting

It is imperative that when you have a custom wine cellar built in California, you keep it away from exposure to direct sunlight. There should be as little light as possible that reaches your wine bottles. There are various organic compounds within wine that are essential to its structure, aroma and flavor. Direct exposure to light, especially ultraviolet light, can potentially destroy these compounds and degrade the quality of your wines.

2. Vibration

Vibration isn’t really a big problem. It can occasionally be a problem when wines are exposed to too much of it like for example, when you keep your wine bottles on top of the kitchen refrigerator. Besides the risk of the bottles breaking, excess vibration can also prevent sediments from settling, and may affect the flavor of your wines. To protect your wine collection from vibration, store it in properly constructed custom wine racks in Orange County, California.

3. Humidity

Wines need to be kept in an adequately humid environment. Ideally, your custom wine cellar in Orange County should have a humidity level that ranges from 60% to 75%. Adequate humidity is necessary because too much and too little humidity can both damage your wine collection.

When humidity is above the ideal levels, moisture builds up and can ruin your wine bottle labels. Mold can form, too, and contaminate your wines. One way to prevent mold formation is by wrapping your wine bottles in saran wrap. Some people would use hair spray and other sealants, but these have unpleasant odors. Saran wrap effectively keeps mold out without having bad odors.

On the other hand, when the humidity is too low, corks may shrink and allow air to enter the bottles. When air comes in contact with the wine, oxidation happens, and this ruins the flavor of your wines. Wines that have been exposed to air often have a rusty taste to its flavor.

If your area has a very dry climate, or if your house is heated and cooled by central air, a good way to have humidity inside the custom wine cellar in CA is by placing a saucer of water inside.

4. Temperature

Temperature is the most important element to wine storage, and the most important consideration when building a home wine cellar in Orange County, California. Wines require a wine storage room wherein the temperature is maintained between 55 to 58 degrees Fahrenheit. There should be minimal to no fluctuations in the temperature level, because frequent fluctuations will negatively affect your wines. Have a quality wine cellar refrigeration system installed in your home custom wine cellar in CA, so that you can be sure that your wines are kept in the ideal storage temperature.

Coastal Offers the Best Custom Wine Cellar Doors

At Coastal Custom Wine Cellars, each wine cellar project is challenging. There are many components that must be installed properly and factors to consider from the design phase to the completion of your wine cellar. One of these is the wine cellar door which plays a very important role in proper wine storage.

How Your Wine Cellar Door Must be Constructed

Wine cellar doors must be constructed in such a way that they are able to perform their function in preventing warm air from the outside and the cooler air inside the wine cellar from mixing. Thus, proper insulation and sealing of the entryway to your wine’s resting place must be given importance.

How is a wine cellar door constructed so that it is appropriately sealed? To ensure that no air escapes out of your wine cellar, the door must be weather-stripped and attached with sweep and threshold or automatic bottoms. Wine cellar door manufacturers use the right size of door jam to ensure effective sealing.

Benefits of Proper Wine Cellar Insulation

A wine cellar that is well insulated will keep wine storage temperature and humidity levels stable, allowing wines to reach proper maturation and release their most desirable flavors and aromas before they are served and enjoyed with family or friends. Without proper sealing, your wine collection will go to waste.

This also lowers energy consumption since your wine cellar cooling unit will not run continually when the door is tightly sealed.

Custom Wine Cellar Doors by Coastal Custom Wine Cellars

When choosing a wine cellar door manufacturer, Coastal Custom Wine Cellars is the company you can count on. They construct wine cellar doors using LVL (Laminated Veneer Lumber) technology. This process results in wine cellar doors that are resistant to shrinkage and warping.

In addition to durable doors, Coastal’s wide array of wine cellar doors can be customized to meet your personal style. For the material, you can choose from wood, glass, wrought iron, or a combination of these. You can also request your personal choice of theme which you want to be incorporated on the door.

Custom Wine Cellar Doors by Coastal

Before choosing your door, make sure to first determine the look that you desire for your wine cellar. Whether you want a traditional, contemporary, or vintage look, it’s all up to you. Click here to view wine cellar door options.

Coastal Custom Wine Cellars will listen to every detail of your wine cellar needs. They are one of the best California wine cellar designers and manufacturers who have completed remarkable projects. They also offer stylish wine racks, efficient wine refrigeration systems, and unique wine cellar flooring.

Wine Cellars by Coastal – a Wine Cellar Expert

Request a 3D wine cellar design for FREE! Contact Coastal at (888) 735-8889 or visit their website at http://www.winecellarsbycoastal.com.

The Importance of Wine Cellar Insulation

Custom wine cellars are the perfect place to store wines, because they are able to provide them with the ideal conditions, so that they age properly. Wine cellar insulation is an integral part of the ability of a wine cellar to do this. A wine cellar in Orange County that does not have proper insulation is practically useless. Some people build their own residential wine cellars without any vapor barriers. If you are a genuine wine lover, you need to understand the importance of proper insulation and vapor barriers.

Problems Caused by Poor Custom Wine Cellar Insulation

Many problems can arise from a poorly built custom wine cellar. You will have to deal with mold problems and/or the need for more moisture. Also, if your cellar is poorly constructed, your wine cellar cooling system will have to use up more energy to function. This will wear out the wine cellar cooling unit fast!

Moreover, a wine cellar in Orange County that is poorly insulated will have problems providing the right humidity for wine storage. Ideally, the humidity level in a wine cellar is 55 to 75%. Humidity is very important in a custom wine cellar in CA, because it helps keep the wine corks moist. Wine corks shrink when they become dry, and when they do, air can get in and ruin your wine.

Thermal Insulation, Air Barrier and Vapor Barrier

There are many kinds of wine cellar insulation. One of the best kinds is Closed Cell spray foam, which is also referred to as medium density or 2 pound insulation. This product is liquid that turns to foam and expands to 20-30 times its liquid size, creating an air-tight seal. Once it has expanded, it seldom needs trimming, with little to no waste. This type of insulation is very durable and is able to increase the shear and racking strength effectively. This product is a Code Approved Vapor Barrier and has a permeability rating 45ng. It is also a Code Approved Air Barrier and Thermal Insulation.

Other Factors That Help Creating Proper Wine Storage

Wine insulation is one of the most important things in creating the right storage conditions for wine storage. Along with good wine cellar insulation, you need to have your residential wine cellar designed and built by a professional. You also need an efficient wine cellar cooling unit to keep the temperature and humidity inside the storage room at the ideal levels.

Coastal Custom Wine Cellars provides more tips on how to create the perfect resting place for your favorite wines. They also have wine cellar professionals who can provide you with a free consultation and design of your dream custom wine cellar in Los Angeles, California.